60K High Pressure Seal Kit – Intensifier Pump Seal Components
The 60K High Pressure Seal Kit is designed to service water jet intensifier pumps. In the KAD product photos there are three rings: a thick white ring, a red ring which is also circular, and a split ring of light-colour, but also a partial assembly view. Images are a good starting point to identify the needed seal setup but do not form a total kit setup. Before ordering, the buyers should make sure to confirm the pump model, original part number, ring dimension, material specification, quantity etc.
- Multiple High-Pressure Seal Components
- Ring and Support Element Configurations
- Seal Dimension and Part Number Matching
- 60K Intensifier Maintenance Supply
Share:
- Description
- Specification
- Application
- FAQS
Description – High Pressure Seal Components for Waterjet Intensifier Service
High-pressure sealing components are an important part of the water-side sealing arrangement in compatible waterjet intensifier pumps.
During pump operation, the approved seal arrangement must work with the designated plunger, housing, and adjoining components.
High-pressure seal kits may contain different sealing and support elements, depending on the pump design and original equipment specifications.
The KAD product gallery shows three ring-shaped components in separate and partially assembled configurations.
These include a thick white ring, a red circular ring, and a light-colored ring with a visible split.
The photographs indicate a group of related components, but the exact material grades, original part numbers, installation positions, and complete kit quantity are not specified on the current product listing.
For this reason, replacement selection should begin with the original intensifier model and parts diagram rather than the external appearance of the rings alone.
Main Sealing Ring
The white component shown in the KAD photographs is a comparatively thick annular part with a wide body and a central opening.
Its dimensions and profile are important for component identification.
In an intensifier high-pressure sealing arrangement, a primary sealing element may be designed to provide the required contact with an approved mating surface.
However, the exact function of this photographed white component must be established from the original parts list.
When identifying the required part, buyers should confirm:
- Original part number
- Inside diameter
- Outside diameter
- Axial thickness
- Seal profile
- Material specification
- Installation position
- Compatible pump model
Differences in the seal profile or material specification can make two visually similar parts unsuitable for substitution.
Red Circular Ring
The gallery also shows a separate red circular ring.
In many intensifier seal kits, an O-ring forms part of a sealing arrangement alongside other sealing and support components.
The color and shape of the KAD component are consistent with this general type of ring, but its exact function and elastomer grade remain unverified.
Buyers should confirm the ring's specified inside diameter, cross-sectional diameter, material, hardness, and original part reference.
Color alone should not be used to identify an O-ring material or establish its temperature and pressure suitability.
The required ring must correspond to the approved pump assembly.
Split Backup or Support Ring
The third visible component is a light-colored annular ring with a narrow split.
In some high-pressure seal arrangements, backup rings or support elements help position other components or support the sealing system under its intended operating conditions.
The split design may be relevant to the original assembly, but the exact function of this KAD ring must be confirmed.
Important identification features include:
- Ring inside and outside diameter
- Axial width
- Split configuration
- Material grade
- Specified installation orientation
- Associated sealing components
- Original part reference
A split support ring should not automatically be treated as interchangeable with an unsplit ring of similar dimensions.
How the Seal Components Work Together
High-pressure sealing performance depends on the complete approved arrangement, not on one ring in isolation.
Depending on the intensifier model, the assembly may include a primary seal, an O-ring, a seal hoop, a backup ring, or other manufacturer-specified components.
The order, orientation, and quantity of the components are determined by the original assembly design.
The KAD product photographs include a view in which the red ring appears positioned around the white component, while a light-colored split ring is shown separately.
This is a useful visual reference, but it is not a substitute for an approved assembly drawing.
Customers should confirm whether the displayed rings form a complete repair kit or represent only selected parts of a larger seal arrangement.
How to Verify Kit Contents Before Ordering
A 60K high-pressure seal kit should be identified by the actual components required for the specific intensifier model.
Different manufacturers and intensifier generations may use different kits, even when their nominal operating pressure is the same.
Before quotation, compare the original parts list with the proposed supply configuration.
| Item to Verify | Required Information | Purchasing Purpose |
|---|---|---|
| Intensifier Model | Manufacturer and equipment model | Identifies the correct sealing arrangement |
| Original Kit Number | OEM or existing supplier reference | Establishes the kit version |
| Individual Part Numbers | Reference for each seal and support component | Prevents incorrect substitutions |
| White Ring | Dimensions, profile and material | Confirms the specified sealing element |
| Red Ring | Dimensions, material and hardness | Confirms the required ring specification |
| Split Ring | Dimensions, split geometry and material | Confirms the required support component |
| Quantity Per Kit | Number of each part | Avoids incomplete repair orders |
| Included Accessories | Lubricant or other components, if specified | Clarifies the supply scope |
| Pump Generation | Original or revised equipment version | Checks design compatibility |
| Purchasing Quantity | Number of complete sets or individual parts | Supports accurate quotation |
For repeat orders, customers should retain an approved bill of materials for the required kit.
This allows future orders to be checked against an established component list.
Why Choose KAD for 60K Seal Kit Sourcing?
| Item | Specification |
|---|---|
| Product Type | Waterjet Cutter Head Parts |
| System Pressure | 60,000 PSI (60K) |
| Function | Jet formation and cutting control |
| Cutting Type | Pure waterjet / abrasive waterjet |
| Material | Stainless steel / ruby / tungsten carbide |
| Machining Process | CNC + micro-hole precision drilling |
| Operation Mode | Continuous industrial use |
| Application | Waterjet cutting machine systems |
1. Intensifier High-Pressure Seal Replacement
Compatible high-pressure seal components may be required during scheduled or condition-based intensifier maintenance.
The correct kit must be selected using the original pump model, kit reference, and approved service documentation.
2. Seal Arrangement Inspection
Service technicians may inspect sealing rings and associated support elements when investigating pump leakage or recurring seal damage.
The complete sealing arrangement and mating components should be assessed according to the original equipment service instructions.
3. Pump Rebuild Parts Preparation
Before an intensifier rebuild, maintenance teams may prepare the required seals, O-rings, support rings, and other approved replacement parts.
An itemized parts list helps ensure the required components are available before maintenance begins.
4. Distributor Stock Replenishment
Industrial distributors supplying waterjet spare parts may stock different seal kit references for separate equipment models.
Clear kit labels and individual part-number records support repeat ordering and inventory control.
5. Bulk Maintenance Purchasing
Facilities operating multiple waterjet pumps may consolidate their maintenance requirements into a purchase request.
Each required kit should be identified separately by model, version, part number, contents, and quantity.
1. What is included in a 60K High Pressure Seal Kit?
The included parts depend on the intensifier model and the specific kit reference. High-pressure seal kits may contain primary seals, O-rings, support rings, seal hoops, or other components defined by the manufacturer. The KAD photographs show a white ring, a red ring, and a split light-colored ring, but the complete kit contents and quantities have not yet been verified. Buyers should request the confirmed parts list before purchasing.
2. Is a 60K high-pressure seal kit used in the cutting head or intensifier pump?
High-pressure seal kits of this type are commonly used in the sealing system of a waterjet intensifier pump rather than in the downstream cutting head. The correct installation location depends on the original part number and equipment design. Customers should verify the pump model and assembly drawing before selecting the kit, especially when an older product listing uses the general term "cutting head parts."
3. What is the difference between a high-pressure seal and a backup ring?
A high-pressure sealing element and a backup or support ring generally perform different functions within an approved sealing arrangement. The sealing element provides the specified sealing contact, while the support component may help maintain the required assembly geometry or resist seal extrusion, depending on the design. Their exact functions, dimensions, materials, and installation positions must be confirmed from the original equipment parts list.
4. Can I use the same 60K seal kit on different waterjet intensifier models?
Not automatically. A shared nominal pressure class does not establish interchangeability. Different pumps may use different plunger dimensions, seal profiles, support components, and kit revisions. Buyers should compare the original kit numbers and approved component specifications before selecting a replacement for another machine or pump version.
5. How can I tell when high-pressure seals need replacement?
Replacement decisions should follow the intensifier manufacturer's maintenance and inspection instructions. Potential concerns may include visible seal damage, unexpected leakage, abnormal wear, or recurring service issues. These symptoms can also involve other pump components, so diagnosis should not rely on a seal kit assumption alone. Qualified personnel should inspect the system only after it has been safely shut down and fully depressurized.
6. What information should I provide when requesting a seal kit quotation?
Please provide the intensifier manufacturer, pump model, original seal kit number, individual component references, required quantities, and estimated order volume. If available, include an original parts diagram and photographs of the existing components. KAD can review these details to clarify the requested supply configuration and quotation requirements.
