Waterjet Intensifier Parts

Aluminum 6061 is a versatile, lightweight alloy known for good mechanical properties, corrosion resistance, and excellent weldability. It is widely used in structural components, aerospace, automotive, and general engineering.

Aluminum A5052 is a corrosion-resistant alloy with good weldability and moderate to high strength. It is widely used in marine, automotive, and general industrial applications.

A1100 is commercially pure aluminum (99%+ purity) with excellent corrosion resistance, workability, and thermal conductivity. It is soft, ductile, and non-heat-treatable. Widely used in chemical equipment, roofing, cooking utensils, and decorative parts.

2A12 is a high-strength aluminum-copper alloy commonly used in aerospace and high-load structural applications. It offers excellent fatigue resistance and good machining performance but has relatively low corrosion resistance, so surface treatment is often required.

Brass is a copper-zinc alloy known for its good mechanical properties, excellent corrosion resistance, and attractive golden color. It is widely used in decorative fittings, electrical components, plumbing, and precision machined parts.

Copper (CU) is a highly conductive metal with excellent corrosion resistance. Its common alloys include Brass (copper-zinc), Bronze (copper-tin), and Pure Copper (red copper). These materials are widely used in electrical, mechanical, and decorative applications.

Magnesium alloy is a lightweight metal alloy known for its high strength-to-weight ratio, excellent machinability, and good vibration damping. It is widely used in aerospace, automotive, and electronics industries where weight reduction is critical.

Zinc alloy is a versatile metal alloy known for its good strength, excellent castability, and corrosion resistance. It is widely used in die casting for automotive parts, hardware fittings, and decorative items.

Aluminum 3003 is a commercially pure aluminum alloy with manganese as the primary alloying element. It offers good corrosion resistance, excellent workability, and moderate strength. It is commonly used in roofing, siding, and cookware applications.

Aluminum A5056 is a high magnesium-content alloy known for excellent corrosion resistance, especially in marine environments. It offers good weldability and moderate strength, widely used in shipbuilding, marine hardware, and chemical equipment.

A2017 is a high-strength aluminum-copper alloy known for excellent machinability and good mechanical properties. It is commonly used in aerospace, transportation, and precision machinery. Corrosion resistance is moderate, often requiring surface treatment.

C3604, also known as free-machining brass, is a copper-zinc alloy with excellent machinability, good corrosion resistance, and attractive golden color. It is widely used in precision machining parts, electrical connectors, and plumbing fittings.

The 5000 series aluminum alloys are magnesium-based alloys known for excellent corrosion resistance, good weldability, and moderate to high strength. They are widely used in marine, automotive, and structural applications.

AL1070 is a commercially pure aluminum with very high electrical and thermal conductivity, excellent corrosion resistance, and good workability. It is commonly used in electrical conductors, heat exchangers, and chemical equipment.

AL2024 is a high-strength aluminum-copper alloy widely used in aerospace and structural applications. The T6 temper means it is solution heat-treated and artificially aged to achieve high mechanical strength. It offers excellent fatigue resistance but moderate corrosion resistance, so surface protection is usually necessary.

AL7075, 7050, and 7451 are high-strength aluminum-zinc-magnesium-copper alloys widely used in aerospace, military, and high-performance structural applications. They offer excellent strength, good fatigue resistance, and moderate corrosion resistance, often requiring surface treatments.

5083 is a non-heat-treatable aluminum-magnesium alloy known for exceptional corrosion resistance, especially in marine environments. It has good weldability and moderate-to-high strength, making it ideal for shipbuilding, transportation, and structural applications. Imported 5083 typically meets international quality standards ensuring high reliability.

6082 is a medium-strength heat-treatable aluminum-magnesium-silicon alloy, widely used in structural and engineering applications. It offers good corrosion resistance, excellent weldability, and good machinability. Imported 6082 generally meets strict international standards for quality and performance.

7075 is a high-strength aluminum-zinc-magnesium-copper alloy widely used in aerospace, military, and high-performance applications. It offers excellent mechanical properties and good fatigue resistance but moderate corrosion resistance, often requiring surface treatments. Imported 7075 typically meets stringent international quality standards.

6061-T561 is a heat-treated aluminum-magnesium-silicon alloy known for good mechanical strength, excellent corrosion resistance, and very good machinability. The T561 temper indicates it has been solution heat-treated, stress relieved by stretching, and artificially aged. It is widely used in structural parts, automotive, and precision components. Imported material meets strict international standards for quality and consistency.

AL1060 is a commercially pure aluminum alloy with an aluminum content of about 99.6%. It has excellent electrical and thermal conductivity, outstanding corrosion resistance, and very good formability. Commonly used in electrical conductors, chemical equipment, and sheet metal parts.

C2801P is a brass alloy with around 60% copper and 40% zinc, known as "Muntz metal" or alpha-beta brass. The “1/2H” indicates half-hard temper, giving it moderate strength with better formability compared to full hard. It offers good corrosion resistance, good cold workability, and is commonly used for architectural trim, hardware, and decorative parts.

C1020P is a high-purity oxygen-free copper (OFC) with excellent electrical and thermal conductivity, outstanding ductility, and good corrosion resistance. It is widely used in electrical applications, electronic components, and vacuum devices where high conductivity and cleanliness are critical.

A7072 is an aluminum alloy mainly alloyed with zinc (around 1%) and designed primarily for cladding on heat exchanger tubes and other applications that require good corrosion resistance. It has excellent corrosion resistance, good formability, and is often used as a cladding layer on high-strength core alloys (like 3003 or 7075) to enhance corrosion protection.

The A7000 series refers to high-strength aluminum-zinc-magnesium-copper alloys. Known for excellent mechanical strength and good fatigue resistance, they are widely used in aerospace, military, and high-performance engineering applications. Typical grades include 7005, 7050, 7075, and 7049. While strength is very high, corrosion resistance is moderate, so surface treatments are usually applied.

C1100 is a commercially pure copper (also known as electrolytic tough pitch copper, ETP) with very high electrical and thermal conductivity, excellent ductility, and good corrosion resistance. It is widely used in electrical conductors, bus bars, wiring, and heat exchangers.

A2014 is a high-strength aluminum-copper alloy known for excellent machinability, good mechanical properties, and fair corrosion resistance. It is often used in aerospace parts, heavy-duty forgings, and precision components requiring high strength and good wear resistance.

The 7000 series aluminum alloys are zinc-based, high-strength alloys with excellent mechanical properties and fatigue resistance, widely used in aerospace, military, and high-performance structural applications. Typical grades include 7075, 7050, and 7005. Corrosion resistance is moderate, so they often require surface treatments.

Titanium alloys are known for their high strength-to-weight ratio, excellent corrosion resistance, and good biocompatibility. They are widely used in aerospace, medical implants, chemical processing, and high-performance engineering applications. Despite being lightweight (density about 4.6 g/cm³), titanium alloys offer superior mechanical properties and resistance to extreme environments.

7075 is a high-strength aluminum-zinc-magnesium-copper alloy, widely used in aerospace, military, and high-performance engineering parts. It features excellent mechanical strength and fatigue resistance, with moderate corrosion resistance—so it’s often treated with anodizing or coatings.

A2011 is a free-machining aluminum-copper alloy known for excellent machinability and good mechanical strength. It is often used for high-speed automatic lathes, precision turned parts, and screw machine products. It offers fair corrosion resistance and is typically used where complex shapes and fast production are required.

A2024 is a high-strength aluminum-copper alloy, widely recognized for its excellent fatigue resistance and good machinability. It is commonly used in aerospace structures, rivets, and precision components requiring high strength-to-weight ratio. While it has good mechanical properties, its corrosion resistance is moderate and often needs protective coatings.

A7050 is a high-strength aluminum-zinc-magnesium-copper alloy designed mainly for aerospace structural applications. It offers very high strength, excellent fracture toughness, and good stress corrosion cracking resistance—making it suitable for thick sections and critical parts. Its overall corrosion resistance is better than some other 7000 series alloys like 7075.

11SMn30 is a free-cutting non-alloy steel with added sulfur (~0.27–0.33%) to improve machinability. It offers very good machinability, making it ideal for high-volume production of turned parts, screws, and fittings. However, due to higher sulfur content, its weldability and toughness are limited.